Cycling mode allows the Run Time to repeat continually after the scheduled interval (Soak Time) from a Start Time to an End Time.
- Press the Schedule Icon and select the Cycling tab
- Water Days: Select the desired water days. Save and Confirm.
- Start Times: Set START TIME 1 and optional START TIME 2. Save and Confirm.
- End Times: Set END TIME 1 and optional END TIME 2. Save and Confirm.
- Run Time: Set the desired RUN TIME from 1 second to 24 hours. Save and Confirm.
- Soak Time: Set optional SOAK TIME, the time between each Run Time, from 1 second to 24 hours. Save and Confirm.
- Off Mode: To shut down Cycling Mode, select the Off tab and Confirm.
- In-App Manual Mode: For Manual Irrigation, select the Manual tab and set a value of 1-360 minutes. Press Start and OK.
