Eco Logic Support

Eco-Logic - Resetting the Controller

If you feel that you have misprogrammed your controller, there is a process that will reset the memory to the factory defaults and erase all programs and data that have been entered into the controller.

Step 1

Press and hold the , , and buttons.

Step 2

Press and release the reset button located in the lower wiring compartment.

Step 3

Wait 2 seconds and release the , , and buttons. The display should now show 12:00 am. All programmed data has been cleared from memory and the controller can now be reprogrammed.

Rate this Article: 

Was this article helpful? Yes | No