Designers - Page 3

NOTE: Complete this section only if you have a master valve installed in your irrigation system. A master valve is a “normally closed” valve installed at the supply point of the main line that opens only when the controller initiates a watering program.  Whenever one of the irrigation zone valves is told to open by the controller, the controller also signals the master valve to open. The purpose of the master valve is to shut off the water to the irrigation system when none of the zone valves are operating. 

USA

Below is a chart indicating the maximum wire runs that can be used when installing Hunter AC solenoids and valves.

USA

The CLIK DELAY option is designed to set number of days for watering to remain off, after sensor has been activated and restored.

USA

The trajectory and spray height of the water stream leaving a sprinkler nozzle is important information when designing and installing irrigation systems.  These spray nozzle trajectory charts are designed to help determine how close a sprinkler can be placed to an object such as a fence or hedge without obstructing the spray pattern. All information shown is at optimum operating pressures.

A = Degrees of trajectory

B = Max Height of Spray

C = Distance from head to Maximum Height

USA

About this event

Produtos inovadores para irrigação de campos esportivos, jardins e áreas verdes. Sistemas de automação para economia de água.