An irrigation valve that leaks can be a huge water-waster. Slow leaks can be especially problematic because they’re often hard to spot.

An irrigation valve that won’t close can quickly cause major problems like overwatering, flooding, runoff to adjacent properties, and water waste. It’s

Irrigation valves are complex products that can be intimidating to install and maintain. When a valve isn’t turning on as expected, it’s a concern for

In this video, we will show you how to install and adjust an Accu Sync® Pressure Regulator. Pressure regulation at the valve maximizes irrigation

Tuning an Irrigation Valve Using Flow Control Like any car, boat, or motorcycle, valves require periodic tune-ups to perform at their best. It’s easy to

External Components of a Valve Internal Components of a Valve What keeps a valve closed? What causes a valve to open? What happens to cause an open

In this video, we’ll identify the parts that make up three of Hunter’s most popular irrigation valves — and then reassemble each one to better

If you’re new to irrigation controllers, it’s important to understand the terms used before you attempt to create a watering program. In this video, we

The Pro-C® P2C-400 Controller includes simplified programming and flexible station expansion, making it a great choice for residential and light

In this video, you’ll learn how to connect a Hunter Clik Sensor to a Pro-C ® P2C-400 Controller.

In this video, you’ll learn how to connect and set up a Solar Sync® Sensor on a Pro-C® P2C-400 Controller. Follow along to learn how to install the

In this video, you’ll learn how to prepare a Hunter Pro-C® P2C-400 Controller for operation. The Pro-C is a modular controller that allows for expansion

In this video, we’ll talk about the advanced functions included with the Pro-C® Controller. Most of these functions are hidden under various dial

In this video, we’ll show you how to complete a basic program for the Pro-C® P2C-400 Controller. The Pro-C Controller can control up to 32 total

When taken out of the box, the Hunter ST-1600 Rotor will be able to make a complete 180-degree sweep in 80 seconds at 90 PSI (6.2 bar; 620 kPa). In this

We’ll show how to set up a typical wire and valve locator, how to locate a valve, track and mark the wire location to aid in troubleshooting wiring

Once you’ve determined that the controller and valve are working properly, you need to take a closer look at the wiring to determine where the problem

In this video, we’ll cover typical grounding specifications; two-wire decoder system grounding; Hunter ICD decoder grounding; using the Dual-S surge

We’ll be going over the basic functions of a voltmeter and how you can use it in locating problems within your irrigation system. We’ll be talking about

When you are looking for a bad wire, testing a solenoid's health, or testing the power output from an irrigation controller, it is essential to have the

In this video, we’ll show you how to assemble and install a Hunter ST-1600 Synthetic Turf Irrigation Kit. This all-in-one irrigation system is designed

In this video, we will show you how to troubleshoot your WAND Wi-Fi module to successfully connect your X2 controller to the internet.