You can also activate all stations to water without using the dial.
Hold down the arrow (>) button for 2 seconds. When you will see station 1 appear on screen, release the arrow (>) button.
This feature automatically defaults to program A. You can select program b or C by quickly pressing the PRG button.
The station number will be flashing. Press the arrow (>) button to scroll through the stations and use the plus (+) or minus (-) button to adjust station run times. (If no buttons are pressed for a few seconds during step 2 or 3, the controller will automatically begin watering).
Press the arrow (>) button scroll to the station you wish to begin with. After a 2 second pause, the program will begin. At any time during the manual cycle, you can use the plus (+) or minor (-) buttons to navigate from station to station manually.
Was this article helpful? Sí | No
To view this page in a different language, please select from the list below.