X2 Support

X2 - Delay Between Stations

This feature allows the user to select a time delay between the end of one station run time and the start of another station's run time. The delay can be set for 1 second up to 8 hours. The delay is a convenient feature when working with slow closing valves or slow well water recovery.

Step 1

Start with the dial in the RUN position.

Step 2

Press and hold the    button down while turning the dial to the RUN TIMES position.

Step 3

Release the    button. At this point, the display will show a delay time for all stations in seconds, which will be flashing.

Step 4

Press the     or    buttons to increase or decrease the delay time between 00 seconds to 8:00 hours.

Step 5

Return the dial to the RUN position.  

Rate this Article: 

¿Te resultó útil este artículo? | No