Support
X2 Support

X2 - Easy Retrieve™

The Easy Retrieve feature allows the user to save a program in the controller's memory for later use. The saved program can be retrieved at any time to overwrite unwanted changes in the current program. The saved program can then be used as a custom default restoration point.

 

Save Program
  1. With the dial in the RUN position, press and hold the + and PRG buttons for 5 seconds. You will see three segments    on the left of display.
  2. Release the + and  PRG buttons.
  3. The display will scroll three segments    from left to right across the display indicating the program is being saved into memory.
  4. The display will show "dONE", and then revert to time of day display.
  5. The Program is now saved into the controller memory.
Retrieve Program
  1. With the dial in the RUN position, press and hold the - and  PRG  buttons for 5 seconds. You will see three segments    on the right of display.
  2. Release the  - and  PRG buttons.
  3. The display will scroll three segments    from right to left across the display indicating the program is being retrieved from memory.
  4. The display will show "doNE", and then revert to time of day display.
  5. The saved program is retrieved from memory.
Rate this Article: 
0

Was this article helpful? | No