Pump Start Relay

This reliable and economical pump start relay family is perfect for systems that require pump activation.

Type Accessory

A pump start relay family for a variety of voltage and power requirements.

24 VAC flying leads make connection to the controller quick and easy

Suitable for conventional wiring or two-wire decoder activation, allows flexible installation options

Models

Model	Description	Add to List
PSR-22	Pump Start Relay, double-pole/single-throw for 120 VAC pumps up to 2 hp, or 230 VAC pumps up to 3 hp	+
PSR-52	Pump Start Relay, double-pole/single-throw pump start relay for 120 VAC pumps up to 3 hp, or 230 VAC pumps up to 7.5 hp	+
PSR-53	Pump Start Relay, triple-pole/single-throw pump start relay for 120 VAC pumps up to 3 hp, 230 VAC pumps up to 7.5 hp, or 230 VAC pumps up to 10 hp (three-phase)	+
PSR-B	Pump Start Relay Booster, used to boost controller output power to operate larger pump start relays, if required	+

Create a new My List.

Contact your local distributor for product availability and ordering.

Specifications

Operating Specifications

Recommended installation: minimum 15' from irrigation controller
Primary AC power input: 120/230 VAC
Secondary AC power output: 24 VAC, 1.6 A
Relay rating: Double-pole, double-throw solid state (10 A)
Approvals: IP54, UL, cUL, FCC, CE, RCM, ISED
Warranty period: 2 years

Download Product Spec Sheet

Features

When a system requires the use of a booster pump or pulls water directly from a creek or pond, it’s imperative to include a relay that can be counted on to activate the pump each and every time. Hunter’s Pump Start Relay (PSR) provides that reliability–as well as a lockable NEMA rated enclosure–at an economical price. Available in a choice of three models to accommodate a variety of power sources and landscape needs, the PSR is fully compatible with all standard 24VAC controllers. It’s also designed with user-friendliness in mind. Flying wire leads allow for effortless 24 VAC connections. Plus a wide array of "knockouts" make wiring easy and accommodating to most mounting specifications.

Key Benefits

A pump start relay family for a variety of voltage and power requirements.

24 VAC flying leads make connection to the controller quick and easy

Suitable for conventional wiring or two-wire decoder activation, allows flexible installation options

Provides a solution for irrigation controller and pump start relay installations that have insufficient power to activate the pump

Includes solid state relay and local 24 VAC transformer for simple PSR activation

Charts

Pump Start Relay Electrical Specifications

Models	Single Phase		3 Phase**	Max. Full Load Amps	Max. Resistive Amps	Coil VA		Coil VA
Models	HP at 120 VAC	HP at 230 VAC	HP at 230 VAC	Max. Full Load Amps	Max. Resistive Amps	Inrush	(Amps)	Holding	(Amps)
PSR-22	2*	3*	N/A	30	40	30	(1.25)	6.5	(0.27)
PSR-52	3	7.5	N/A	40	50	60	(2.50)	5	(0.21)
PSR-53	3	7.5	10	40	50	60	(2.50)	5	(0.21)
Note: * Approximate power ** 3 phase power at 230 VAC is not commonly available in some international markets. Check local electrical codes for compatibility.