A watering program (SCHEDULE) can be created to operate valves in numerical sequence one at a time. For the controller and its selected program (SCHEDULE) to operate automatically, there are three components that must exist: When to water (or Program Start Times), how long to water (or Station Run Times), and the day of the week to water (or Days to Water). When using Centralus Software, you can send these commands directly to the ACC2 Controller.
Follow the mobile steps below to set up START TIMES.
The SCHEDULE tab will be the default selection. Select a PROGRAM to begin setup.
Select the EDIT icon to open the Start Time options.
Select a MODE.
Select STACK or OVERLAP.
If a WATER WINDOW is desired, set start and end times.
If a STATION DELAY is desired, set a delay time between when one station turns off and the next station turns on.
Select a START TIME. Start Times can be set in one-minute increments.