Support
DUAL Support

System Overview

  1. I-CORE CONTROLLER
  2. DUAL -1 (One-Station Decoder)
  3. MAX DISTANCE TO END OF TWO-WIRE PATH
    ID1 WIRE (14 Ga) 5000 feet (1500 m) OR
    ID2 WIRE (12 Ga) 7500 feet (2300 m)
  4. DUAL-S SURGE ARRESTOR (Recommended every 1000 feet, 330 m)
  5. GROUND PLATE (Or ground rod)
  6. DBR/Y-6 WATERPROOF CONNECTORS in all two-wire path splices
  7. DUAL-2 (two-station decoder)
  8. MAXIMUM DISTANCE 5000 FEET (1500 m) to end of two-wire path
  9. DUAL-S (Placed at end of two-wire path) 

Note: Dual decoders are for Station Valves only.  Pump/Master Valve and Sensors need to be wired separately to the corresponding terminals in the controller.

Rate this Article: 
0

Was this article helpful? Yes | No