Support
DUAL Support

DUAL - Programming decoders with ICD-HP

This instrument can operate and program ICD and DUAL decoders via wireless induction, through the base of the decoder with a programming cup. This allows access to installed decoders, without removing waterproof wire connectors.

ICD-HP can also be used for intial setup of new decoders. The included power leads will power a decoder for programming purposes, for installation later.

ICD-HP can be used for diagnostic operation and testing of installed decoders, solenoids, and even sensors. ICD-HP can enable new programming options for ICD and DUAL decoders. It can program any station numbers in any order within a multi-station decoder and can "skip" stations to reserve them for future use.

Note: The ICD-HP would need version 1.03 or higher to be compatible with DUAL decoders.

Click Here for ICD-HP programming instructions

Click here for ICD-HP update instructions

Rate this Article: 
0

Was this article helpful? Yes | No