Eco-Logic - Main Display and Control Buttons

Share

Tabs

Read Article

Main Display

Current Time/Day – Set current day and time.
Start Times – Set 1 to 4 start times for each program.
Run Times – Set each valve station run time from 1 min. to 4 hrs.
Water Days – Select specific days to water, odd/even days, or a selected number of days between waterings (interval).
Seasonal Adjustment – Make run time changes according to the seasons without reprogramming the controller.
System Off – Stops all automatic watering.
Program Designator – identifies program in use (A or B). Flashing Sprinkler – indicates that watering is occurring.
Umbrella – indicates rain sensor is suspending irrigation.
Crossed Umbrella – Indicates rain sensor has been manually bypassed.
– identifies month when programming current date.
– identifies month when programming current date.
Manual Single Station – indicates the one time watering of a single valve station.
Manual All Station – indicates the one time watering of all valve stations or selected stations.

Control Buttons

Button – increases displayed item.
Button – decreases the displayed item.
Button – advances to the next item.
Button – advances to the previous item.
Button – Select program A or B for different watering requirements.
Mode Button – Advanced through programming functions.
Installation Details
Rate this Article: 
No votes yet