Welcome Page Body
Welcome to the Spray Nozzle Support section. In this section, you will find information on how to adjust, maintain and troubleshoot the Hunter Spray nozzles.
Section Menu
Installation
-
Nozzle Installation
Hunter spray bodies come preinstalled with a directional flush cap to flush debris out of the line after initial installation or service. Point flush caps at plant area,
-
PS Ultra Nozzles
PS Ultra come preinstalled with the following nozzles: *Any Hunter nozzle can be used with the PS Ultra when retrofitting.
-
Pro Adjustable Nozzles
4A Radius: 4' 6A Radius: 6' 8A Radius: 8' 10A Radius: 10' 12A Radius: 12' 15A Radius: 15'
Adjustment
-
Arc Adjustment
The Hunter Pro Adjustable Nozzles come from the factory with a preset arc of 25 degrees. Prior to setting the left side arc, set the right side
-
Radius or Distance Adjustment
The radius, or distance the water sprays on Hunter Nozzles can be adjusted by turning the center screw on top of the nozzle. This will increase or decrease the radius. All nozzles
FAQ
-
Filter Information
Spray Nozzles are sold with specific filters for two reasons. Using the right filter with the right nozzle protects the nozzle from clogging. The filter screen openings are
-
Trajectory Chart
The trajectory and spray height of the water stream leaving a sprinkler nozzle is important information when designing and installing irrigation systems. These spray nozzle