We’ll show how to set up a typical wire and valve locator, how to locate a valve, track and mark the wire location to aid in troubleshooting wiring

Once you’ve determined that the controller and valve are working properly, you need to take a closer look at the wiring to determine where the problem

In this video, we’ll cover typical grounding specifications; two-wire decoder system grounding; Hunter ICD decoder grounding; using the Dual-S surge

We’ll be going over the basic functions of a voltmeter and how you can use it in locating problems within your irrigation system. We’ll be talking about

When you are looking for a bad wire, testing a solenoid's health, or testing the power output from an irrigation controller, it is essential to have the

In this video, we will show you how to troubleshoot your WAND Wi-Fi module to successfully connect your X2 controller to the internet.

Connect your X2 controller to the internet using the WAND Wi-Fi module. 0:40 - WAND OVERVIEW AND BENEFITS. 1:10 - CHECKING YOUR WI-FI SIGNAL. 1:55 -

In this video, you will learn how X2 works as a standalone controller without Wi-Fi. You will also learn how the WAND Wi-Fi module gives X2 new

Video 7 of 8 installation of the Hunter Dual decoder two-wire system with I-Core controller. Tee-Splicing the two-wire path.

Video 8 of 8 of installation of the Hunter Dual decoder two-wire system with I-Core controller. Programming with the ICD-HP handheld programmer.

Introduction to installation of the Hunter Dual decoder two-wire system with I-Core controller. This video series will go over DUAL, a two-wire decoder

Video 3 of 4 installation of the Hunter Dual decoder two-wire system with I-Core controller. In this section we will instal the Dual 48M decoder output

Video 2 of 8 installation of the Hunter Dual decoder two-wire system with I-Core controller. Grounding the Controller is a vital step in the two wire

Video 4 of 8 installation of the Hunter Dual decoder two-wire system with I-Core controller. This section will go over connecting 2-Wire paths.

Video 6 of 8 of installation of the Hunter Dual decoder two-wire system with I-Core controller. Connecting DUAL-S surge suppressors in line and at the

A brief overview of how the Hunter Solar Sync works to convert most AC powered irrigation controllers to smart control. Learn why the Solar Sync saves

Learn to wire your Soil-Clik moisture sensor with Hunter's Pro-C, X-Core, I-Core, and ACC irrigation controllers. Soil-Clik can also be installed on non

In part three of the Hunter Flow-Sync Sensor setup, Mike will go through installing the sensor and setting up stations to be monitored, change overflow

This video teaches you about how to use your Hunter I-CORE controller with the conservation-focused Solar-Sync sensor. The I-Core is Hunter's controller

In part two advanced programming and extended features, Mike will go through seasonal adjust, cycle and soak, delay between stations and configuration

Irrigation professional Mike Madewell will walk you through programing the Hunter I-Core controller. In part one basic start-up programming, Mike will

An irrigation system that is repeating the cycle and continuously watering most likely has too many start times programmed into the controller. This

This video will teach you how to program your controller to water every other day by selecting odd or even days of the week to water. You will also

One of the most common reasons for a sprinkler system to water intermittently and show the word DELAY on the display is because a delay time was