Hunter Technical Support Document

Share

Resetting the SRC controllers

Topics: 
FAQs

SRC Reset

  1. Unplug the controller's transformer and remove the battery.
  2. Press and hold down the    and   buttons.
  3. Plug the controller's transformer back in.
  4. Release the  ,    and   buttons. The display should now show 12:00a.m.
  5. All the memory has been cleared and the controller may now be reprogrammed.  Reinstall the battery.

 

SRC Plus Reset

  1. Press and hold down the  and   buttons.
  2. Press and release the RESET button in the lower wiring compartment.
  3. Release the  ,  and  buttons. The display should now show 12:00a.m.
  4. All the memory has been cleared and the controller may now be reprogrammed. 
Rate this Article: 
Average: 3.5 (2 votes)

Related Links