Support
Eco Logic Support

Eco-Logic - Normal and Limited Mode

Tabs

Read Article

The Eco-Logic is factory configured with 3 independent programs (A, B, C with four start times each) for different plant type requirements. The Eco-Logic can be customized to display only the required programs. You can hide those programs that are not required to ease programming.

 

 

Customer Type:

Step 1

To access this mode, press the PRG and MINUS (-) buttons simultaneously. After a few moments, release both buttons.

Step 2

You will now see four start times with only program A,and B. Press the PLUS (+)button to access all three programs A, B, And C.

Step 3

Press the PLUS (+) to allow one program with one start time.

Step 4

When finished choosing mode, press the BACK (<)button until you are back to home screen.

Rate this Article: 
0

Was this article helpful? | No