Support
Residential Rotors Support

Residential Rotors - Identifying Adjustment Sockets

PGP Models
  • Arc Adjustment - Adjustable heads are preset to approximately 180˚. Sprinklers may be adjusted with water on or off. It is recommended that initial adjustments be made before installation.
  • Lifting Socket -  Pull the riser up to gain access to the nozzle socket.
  • Nozzle / Radius Adjustment Screw - Adjust the distance of throw and holds the nozzle in place.

 

PGP Ultra Models
  • Arc Adjustment - Adjustable heads are preset to approximately 180˚. Sprinklers may be adjusted with water on or off. It is recommended that initial adjustments be made before installation.
  • Lifting Socket -  Pull the riser up to gain access to the nozzle socket.
  • Nozzle / Radius Adjustment Screw - Adjust the distance of throw and holds the nozzle in place.
I-20 Models
  • Arc Adjustment - Adjustable heads are preset to approximately 180˚. Sprinklers may be adjusted with water on or off. It is recommended that initial adjustments be made before installation.
  • Lifting Socket -  Pull the riser up to gain access to the nozzle socket.
  • Nozzle / Radius Adjustment Screw - Adjust the distance of throw and holds the nozzle in place.
  • Flo-Stop - This will turn flow off to rotor to allow user to simply shut off flow temporarily replace nozzle while running.
PGJ Models
  • Arc Adjustment - Adjustable heads are preset to approximately 180˚. Sprinklers may be adjusted with water on or off. It is recommended that initial adjustments be made before installation.
  • Lifting Socket -  Pull the riser up to gain access to the nozzle socket.
  • Nozzle / Radius Adjustment Screw - Adjust the distance of throw and holds the nozzle in place.
SRM Model
  • Arc Adjustment - Adjustable heads are preset to approximately 180˚. Sprinklers may be adjusted with water on or off. It is recommended that initial adjustments be made before installation.
  • Lifting Socket -  Pull the riser up to gain access to the nozzle socket.
  • Nozzle / Radius Adjustment Screw - Adjust the distance of throw and holds the nozzle in place.
Rate this Article: 
0

Was this article helpful? Yes | No