Soil-Clik - Troubleshooting

Share
Topics: 
Installation Procedures

Problem

Plants are too dry.

Cause

  • Moisture level setting too low.
  • Sensor in wrong location.

Solution

  • Increase arrows (+ button).
  • Move sensor or valve wires; sensor must be in last zone to water.

Problem

Plants are too wet.

Cause

  • Moisture level setting too high.
  • Sensor in wrong location.
  • Pause mode has been set.

Solution

  • Decrease arrows (- button).
  • Move sensor to a sunnier location.
  • Turn off Pause.

Problem

Moisture level seems incorrect.

Cause

  • Incorrect sensor installation/placement.

Solution

  • Ensure full soil contact with sensor.
  • Check sensor wiring.

Problem

Moisture always at max or minimum.

Cause

  • Failed sensor.

Solution

  • Use handheld sensor meter to verify operation.

Problem

Alarm Symbol is displayed.

Cause

  • Module failure.

Solution

  • Replace Module (Part No. SC-MOD).

Problem

Module display is blank.

Cause

  • Power failure.

Solution

  • Check power connection to host controller.

 

Rate this Article: 
No votes yet

Related Links