Easy Retrieve allows the user to save a program in the controller's memory for later use. The saved program can be retrieved at any time to overwrite unwanted changes in the current program. The saved program can then be used as a custom default restoration point.
The XC, X-Core, Pro-C and PCC controllers are all capable of saving the preferred watering program into memory for retrieval at a later time. This feature allows for a quick way of resetting the controller to the original programmed watering schedule.
To save the program into the memory
- With the dial in the RUN position, press and hold the and buttons for 5 seconds. You will see three segments
on the left of display. - Release the and buttons.
- The display will scroll three segments
from left to right across the display indicating the program is being saved into memory. - The display will show "doNE", and then revert to time of day display.
- The Program is saved in memory.
To retrieve a program that was previously saved into memory
- With the dial in the RUN position, press and hold the and buttons for 5 seconds. You will see three segments
on the right of display. - Release the and buttons.
- The display will scroll three segments
from right to left across the display indicating the program is being retrieved from memory. - The display will show "doNE", and then revert to time of day display.
- The Saved Program is retrieved from memory.
Still need help? We're here.
Tell us what you need support with and we'll find the best solution for you.