|SENSOR STATUS LED:|
GREEN: Sensor is dry (watering enabled).
|SENSOR BYPASS LED:|
NOTE: When you first apply power to the receiver, the SENSOR STATUS LED will be RED. Press the manual test spindle on the transmitter for five seconds and release the spindle. The SENSOR STATUS LED will turn GREEN indicating proper operation.
NOTE: Once the desired rainfall quantity has been set, it is recommended that the settings do not change for the entire use of the sensor as the hydroscopic discs become accustomed to the first setting chosen after the first rainfall event. It is unlikely the hydroscopic discs will respond to a new setting which may prevent irrigation from shutting down when expected.
Still need help? We're here.
Tell us what you need support with and we'll find the best solution for you.