Support
BTT Support

BTT - Manual Operation

App - Manual Operation

Manual operation allows you to run a manual cycle from 0:01 (one minute) to a maximum of 6:00 (six hours).  

  1. With the app open, select the manual hand icon.
  2. Select a run time.
  3. Press start.
  4. Press stop to stop the manual operation.
Controller - Manual Operation

BTT-100 (BTT-101) Model: Pressing the manual button will allow the controller to run for a maximum 60 minutes and then shuts off watering.

BTT-200 (BTT-201) Model: Pressing the manual button will allow the controller to run for a maximum 60 minutes (default run time 30 minutes) and then shuts off watering.

For changing the the manual button run time on the two station BTT, review the steps below:

  1. Select SCHEDULE icon at the bottom.
  2. Select SETTINGS gear in the upper right.
  3. Select a ZONE to make manual run time change
  4. Select MANUAL RUN TIME.
  5. Adjust run time and select SAVE.

Rate this Article: 
0

Was this article helpful? | No