BTT - App Programming

The BTT Models (BTT-100 & BTT-200) offer different programming interfaces. The BTT-100 controller offers two modes for programming within the app: TIMER mode and CYCLING Mode. 

  • Timer mode allows for watering at two different start times from 1 minute to 6 hours (5 hours 59 Minutes) per watering day.  
  • Cycling mode allows the Run Time to repeat continually after the scheduled interval (Soak Time) from a Start Time to an End Time.
Timer Mode
  1. Select the SCHEDULE Icon.
  2. Select AUTO.
  3. Select the TIMER tab.
  4. Select the desired WATER DAYS. Click SAVE
    • For interval watering, select INTERVALS, then select the days between waterings (1-5 days). Click SAVE. 
  5. Set START TIME 1 and optional START TIME 2.  Click SAVE.
    • Optional START TIME 2 will repeat the program. 
  6. Set the desired RUN TIME from 1 minute to 6 hours (5 hours 59 Minutes). Click SAVE
  7. The optional RAIN DELAY will suspend irrigation. Set optional RAIN DELAY from 1-7 days. Click SAVE
  8. To shut down Timer Mode, select the OFF TAB and Confirm.

NOTE: The BTT controller retrieves the local date and time from the smartphone it is paired with and updates every time it is connected.

Cycling Mode
  1. Press the SCHEDULE Icon and select the CYCLING tab.
  2. Select AUTO.
  3. Select the desired WATER DAYS. Click SAVE
  4. Set START TIME 1 and optional START TIME 2.  Click SAVE
  5. Set END TIME 1 and optional END TIME 2. Click SAVE
  6. Set the desired RUN TIME from 1 second to 24 hours (23 hrs., 59 min, 59 sec). Click SAVE
  7. Set optional SOAK TIME, the time between each Run Time, from 1 second to 24 hours. Click SAVE.
    • Select OFF if soak time is not desired. If no soak time is selected, BTT will run continuously from Start to End. 

 

Still need help? We're here.

Tell us what you need support with and we'll find the best solution for you.

Contact Support