Support
WR-Clik / Rain-Clik Support

Installing Clik-Delay with Rain-Clik

Rain-Clik®

Clik-Delay Product Guide

Back
Search all videos
More Hunter Videos ▼
Right-click on the video format below and select Save As...MOV | WMVDownload

Category:

  • Product Guide

Product Lines:

  • Sensors
Products: 
Rain-Clik®, Mini-Clik®

Length:

  • Full-Length
Published: 
August 11, 2015

The Hunter Clik-Delay was developed in response to the California Governor's mandate for a 48 hour irrigation delay after a rain event occurs. The Clik-Delay works with the Hunter Rain-Clik and Mini-Clik sensors and interrupts a controller's normal irrigation schedule for 48 hours after rain occurs.

When installed with a rain sensor, the Hunter Clik-Delay is designed to delay controller activation for 48 hours after the rain has stopped.

The Clik-Delay works with Hunter's Rain-Clik® & Mini-Clik® sensors, wired or wireless.

Step 1

Connect both White with Blue-striped wires to the incoming sensor wires from the field.

Step 2

Connect both Gray wires to the Sensor (SEN) terminals on the controller.

NOTE: incoming wires from the individual sensors may have different colored wires.

Resources

USA
Clik Delay Installation Card
Rate this Article: 
0

Was this article helpful? Yes | No

S U P P O R T
M E N U