Eco Logic Support

Welcome to the Hunter Eco Logic irrigation controller support section. The Eco Logic is a simple to use timer. In this section you will find help on installing, programming, running and troubleshooting the Eco Logic

  • Basic Installation
    Remove lower access cover. Place a screw into the wall and hang the controller from the keyhole on the back. Secure the controller using one or more screws below the terminal strip
  • Main Display & Control Buttons
    Main Display Current Time/Day – Set current day and time. Start Times – Set 1 to 4 start times for each program. Run Times – Set
  • Programming the Controller
    Programming your Eco-Logic controller correctly will keep your lawn looking its best. Setting the correct date and time is the first step to programming. Once you set your program
  • Manual Operation
    After all programming has been completed, press the Mode button until the time of day is displayed. This will enable automatic execution of all selected watering programs and
  • Seasonal Adjustment
    Seasonal Adjustment is used to make global run time changes without re-programming the entire controller.
  • Sensor Bypass
    The sensor can be bypassed to allow manual operation when the sensor has deactivated the system.
  • Resetting
    If you feel that you have misprogrammed your controller, there is a process that will reset the memory to the factory defaults and erase all programs and data that have been
  • Hunter Quick Check Diagnostics
    This feature allows you to quickly diagnose wiring problems with your controller.
  • System Off
    System Off To turn your controller off, press the Mode button until the arrow is pointing at the System Off . Wait 2 seconds and the display will read OFF. Valves currently
  • Programmable Off
    This feature will stop all programmed waterings for a designated period of time from 1 to 7 days. After the programmed off period, the controller will automatically resume
  • Troubleshooting Guide
    Problem Display indicates watering but none is occurring. Cause Faulty or miswired valve. Faulty pump or pump relay. No water