Support
ICC2 Support

ICC2 - Hidden and Avanced Features

Feature Where Found Description
PROGRAMMABLE SENSOR OVERRIDE Hold   and turn to START TIMES Sets individual stations to ignore sensor shutdowns. Select stations with   or  , (use  / ) to change
to OFF to ignore sensor.
CYCLE AND SOAK Hold   and turn to RUN TIMES. Enter Cycle, press PRG to set Soak Sets max time a station can run at once, and minimum time it must wait before another cycle.
Divides run time into segments to prevent runoff.
DELAY BETWEEN STATIONS Hold   and turn to RUN TIMES Inserts a delay (seconds or minutes) between stations in a run time, for slow valves or recharging tanks.
HIDE PROGRAMS Hold   and turn to WATER DAYS Use  /  to change from 4 to 1 to hide extra programs. 1 will show only program A,
start time 1. 4 will show all programs and start times.
SOLAR SYNC DELAY Hold   and turn to SOLAR SYNC Set number of days before Solar Sync begins adjusting run times. Allows landscape establishment for a
set period of days, before Solar Sync begins adjusting automatically.
CLIK DELAY Hold   and turn to OFF Set number of days for watering to remain off, after sensor has been activated and restored.
TOTAL RUN TIME Turn to RUN TIMES.
Press   when station 1 is shown,
PRG to select other programs.
Calculates and displays total of all run times in a program start time.
TEST PROGRAM Hold PRG 3 secs. Runs all stations in controller for the time entered for test or diagnostic purposes.
EASY RETRIEVE Hold + and PRG to Save
Hold   and PRG to Restore
Saves all program information to restore at a later time.
TOTAL RESET PRG and RESET button Erases all watering information.
QUICK CHECK  ,  ,  ,   together, then   Checks all stations for wiring problems.
RUN PROGRAM Hold  , PRG to select Runs all stations in selected program; use   to advance to next station manually.

 

 

Rate this Article: 
0

Was this article helpful? Yes | No