ICC2 - Setting Water Days

1. Turn the dial to the Water Days position.
2. The display will show the last program selected (A, B, C, or D). Switch to the desired program by pressing the PRG button.
3. The pointer at the bottom of the screen will blink above “MO” (Monday). Press the + or – buttons to select days for watering () or no water ( – ).
4. After selecting to water or withhold irrigation for a specific day, the pointer will automatically advance to the next day. You can also toggle between individual days by pressing the ► and ◄ buttons.

This feature uses numbered days of the month for watering, instead of specific days of the week (i.e., odd: 1st, 3rd, 5th, etc.; even: 2nd, 4th, 6th, etc.). 

1. Press the ► button past all days of the week so the pointer blinks above “ODD” or “EVEN.” 
2. Press the + button to select or the – button to cancel Odd or Even days.

This feature is convenient if you want to have a more consistent watering schedule without having to worry about specific dates or days of the week. The interval you select is the amount of days between watering, including the water day (e.g., 2-day interval will water every other day). 

1. Press the ► button past “ODD” and “EVEN” until the pointer is blinking above “INTERVAL.” 
2. The number of interval days will blink (the default setting will be 1). 
3. Press the + or – buttons to increase or decrease the interval days (up to 31 days). 
4. Once the interval days are greater than 1, a second number will appear to indicate the days remaining in the interval. Press the ► button to select this number and press the + or – buttons to increase or decrease the days remaining until the next watering. This number represents the desired number of days until the next watering. For example, if you select an interval of 3 days with 1 day remaining, watering will begin tomorrow at the scheduled start time(s) and will repeat the schedule every third day from that day forward. 
5. Within the Interval Watering mode, there is also a No Water Days option. After setting your interval days and days remaining, press the ► button to select individual non-water days. The default setting shows all days available for watering. Press the ► and ◄ buttons to toggle between days and the – button to set any specific day(s) you do not want to water.