CONTROLLER SETTINGS offers more advance features.
Turn On to suspend automatic irrigation. Rain or Clik sensor required. See link here for more sensor CLIK sensor options.
Suspends irrigation after a rain event up to 7 days.
Set the desired level of irrigation shutdown by scrolling from 0 (very dry) to 100 (very wet). Confirm and Save.
The current moisture level will automatically appear. Refresh by swiping down on screen. Soil sensor must be wired and installed.
Naming the progams and stations can be very helpful when you need a better referecne for location (e.g. Front Lawn, Back Drip, etc.).
The Cycle and Soak feature allows you to split a station’s runtime into shorter watering periods. The shorter watering periods will help prevent run off in situations like slopes or tight soils. It is recommended that the Cycle time is less than the station’s watering time, and the Soak time for the water to be absorbed. The total number of cycles is determined by taking the total programmed station run time and dividing it by the Cycle time. Turn on in the Station settings. Input the amount of time the station shall run and pause. Confirm and Save.
Set from 1-99 days. Confirm and Save.
Seasonal Adjustment is used to make global run time changes without re-programming the entire controller. Quickly adjusts run times from 10% to 300% global or by month. Confirm and Save.
This feature allows the user to select a time delay between the end of one station run time and the start of another station's run time. The delay can be set for 10 seconds up to 4 hours. The delay is a convenient feature when working with slow closing valves or slow well water recovery. Confirm and Save.
Turn On to assign Station 1 to use as a pump or master valve for all programs. Station 1 will no longer be used for irrigation. Requires multi-station NODE-BT and normally closed master valve.
Set a custom run time from 1 minute to 12 hours. Save and Confirm.
Restores controller back to factory defaults. Enter passcode if set. Confirm.
Select the System toggle to shut down controller.
Select the date the battery was last changed.
Was this article helpful? Yes | No