NODE-BT Support

NODE-BT - Mounting the Controller to Solenoid Valve

NODE-BT can easily be mounted on any Hunter valve using the included tray holder. A protective rubber cover is provided to prevent dirt from accumulating on the face of the controller

Step 1

Screw the Hunter DC-latching solenoid (P/N 458200) into the valve bonnet.

Step 2

Set the small open end of the tray holder on top of the solenoid.

Step 3

Set NODE-BT controller into the large open end of the holder.

Rate this Article: 

Was this article helpful? Yes | No