Support
NODE-BT Support

NODE-BT - Connecting DC-Latching Solenoids

Step 1

Attach the black leads from each solenoid to the single common wire (black lead) coming from the NODE-BT. Secure all wire connections with waterproof connectors.

Step 2

Attach one red wire from each solenoid to the corresponding station wire (red lead) from the NODE-BT. The station numbers are identified underneath the red wires of the NODE-BT. Secure all wire connections with waterproof connectors.

 

Solenoid Operation: Use only DC-latching solenoids (P/N 458200) operating between 9-11 volts. 24-volt AC solenoids will not operate with NODE-BT.

Wiring Distance: The maximum wire distance between the solenoid and the NODE-BT is 100' (30 m) using 18 AWG (1 mm2) minimum wire gauge.

Rate this Article: 
0

Was this article helpful? Yes | No

S U P P O R T
M E N U