NOTE: In the Start Times dial position, the numbers 1-4 do not represent stations. The numbers represent the program start times. Each program can start up to 4 times on the set days to water. One start time will activate all stations sequentially in that program. If you want the stations to operate one time in sequential order and then not repeat, set start times 2, 3, and 4 to OFF. Multiple start times in a program can be used for separate morning, afternoon, or evening watering cycles. Start times may be entered in any order. The X2 will automatically sort them.
Turn the dial to the START TIMES position.
The factory preset is set on program A. If necessary, you can select program b, or C by pressing the PRG button.
Use the plus + or minus - button to change the start time. (The start times advance in 15 minute increments).
Press the arrow (>) button to add an additional start time, or PRG button for the next program.
Still need help? We're here.
Tell us what you need support with and we'll find the best solution for you.