P2C models are prewired with a power cord and plug for simple installations in both indoor and outdoor applications. If the controller is to be powered by direct line voltage, follow these wiring instructions:
- Route AC power cable and conduit through the ½" (13 mm) conduit opening on the left side of the cabinet bottom.
- Connect the wires to the transformer wires located inside the junction box. Always use a UL Listed conduit ½" (13 mm) male adapter when installing the AC wiring.
- Insert the adapter into the ½" (13 mm) hole at the bottom of the controller. Attach a nut to the adapter inside the enclosure.
IMPORTANT:To be performed by a licensed electrician only. Always use UL Listed ½" (13 mm) conduit with male adapter when installing AC wiring. Pro-C Controllers are intended to be supplied AC power with a 15 A rated overcurrent protected device.
Still need help? We're here.
Tell us what you need support with and we'll find the best solution for you.