The Pro-C Controller is supplied with a factory-installed base module for up to 4 stations. Additional modules may be added in increments of 3 stations (PCM-300), 9 stations (PCM-900), or 16 stations (PCM-1600). In total, a conventionally wired system can be expanded up to 23 stations. Additional modules are sold separately.
The Pro-C Controller is also compatible with the EZ Decoder System (EZDS) for hybrid conventional and two-wire operations. Add a Pro-C Decoder Module (PC-DM) to enable control for up to 32 total stations. This system uses the same EZ-1 Decoders used with ICC2, HCC, and HPC Controllers. For more installation and programming details, please refer to the PC-DM Support page.
The Pro-C Controller is designed with a simple-to-use Power Lock feature that ensures the modules are energized and firmly secured into the controller. The Power Lock can unlock or lock all modules at the same time by simply pushing the Power Lock slide.
- Slide the Power Lock into the Power Off (unlocked) position. Insert the PCM modules into the appropriate sequential position in the controller cabinet.
- Once all of the modules are in place, slide the Power Lock into the Power On (locked) position to energize and secure the modules into the controller.
- The Pro-C Controller will automatically recognize the correct number of stations. It is not necessary to press the reset button on the back of the facepack or cycle power to the controller.
Still need help? We're here.
Tell us what you need support with and we'll find the best solution for you.