ACC2 - Cycle & Soak

The CYCLE & SOAK feature is used to control runoff and puddles when soil or slope cannot absorb all irrigation at once. The CYCLE should be set for the maximum time the station can run at once before runoff occurs. The SOAK should be set for the minimum time the station must wait before applying another cycle. The controller will water other stations during the SOAK period. For this reason, CYCLE & SOAK generally does not extend the overall watering time significantly. The copy and paste shortcuts allow quick duplication of these settings to stations with similar characteristics.

1

Select the lower right soft key to view the MAIN MENU.

2

Turn the scroll wheel to the right to view the STATIONS menu. Push wheel once, then scroll to the option CYCLE & SOAK. Press the scroll wheel to select.

3

Select a STATION NUMBER. Press the scroll wheel to select.

4

Turn the scroll wheel to the right to set a CYCLE TIME. Press the scroll wheel to select.

5

Turn the scroll wheel to the right to set a SOAK TIME. Press the scroll wheel to select. Use the upper right soft key to edit another station or select the HOME button to exit.

Still need help? We're here.

Tell us what you need support with and we'll find the best solution for you.

Contact Support