The CLEAR FLOW ALARM function enables a MainSafe or Flow Zone that has had an Overflow alarm to water again. If a Flow Zone or MainSafe flow alarm has occurred, a shortcut key is provided on the Home screen to Clear Flow Alarms.
If the Alarm Clear Delay is set to Manual Only, a user must manually clear the alarm with this function before it can water again. If Alarm Clear Delay is set to a time in HH:MM format, the controller can run irrigation in the MainSafe or Flow Zone automatically again, after the time has elapsed.
From the HOME Menu, select the lower right soft key to view the MAIN MENU.
Turn the scroll wheel to the right to view the FLOW menu. Press wheel once and scroll to select the CLEAR FLOW ALARM option.
Using the scroll wheel, select the alarms you do NOT want to clear and press the soft key Clear Selected.
NOTE: All alarms are pre-selected when you enter this menu by default.
Using the scroll wheel, select YES to confirm your selection.
