Support
ACC2 Support

ACC2 - Clear Flow Alarms

The CLEAR FLOW ALARM function enables a MainSafe or Flow Zone that has had an Overflow alarm to water again. If a Flow Zone or MainSafe flow alarm has occurred, a shortcut key is provided on the Home screen to Clear Flow Alarms.

If the Alarm Clear Delay is set to Manual Only, a user must manually clear the alarm with this function before it can water again. If Alarm Clear Delay is set to a time in HH:MM format, the controller can run irrigation in the MainSafe or Flow Zone automatically again, after the time has elapsed.

Step 1

From the HOME Menu, select the lower right soft key to view the MAIN MENU.

Step 2

Turn the scroll wheel to the right to view the FLOW menu. Press wheel once and scroll to select the CLEAR FLOW ALARM option.

Step 3

Using the scroll wheel, select the alarms you do NOT want to clear and press the soft key Clear Selected.

NOTE: All alarms are pre-selected when you enter this menu by default.

Step 4

Using the scroll wheel, select YES to confirm your selection.

Rate this Article: 
0

Was this article helpful? Да | No

Support Menu

S U P P O R T
M E N U