Pro-C - Components Support

LCD Display

1. Main Display: Indicates various times, values, and programmed information
2. Year: Identifies current calendar year
3. Month: Identifies current calendar month
4. Day: Identifies current calendar day
5. Start Time: Identifies selected program start time
6. Program Selector: Identifies the program in use: A, B, or C
7. Station Number: Identifies currently selected station number
8. Run Time: Allows user to set each valve station run time from 1 minute to 4 hours
9. Days of the Week: Identifies days of the week to water or not water
10. Odd/Even Watering: Identifies if odd or even watering days are selected
11. Interval: Identifies if interval watering has been selected
12. Seasonal Adjustment: Displays in increments of 5%, the percentage of seasonal adjust that has been selected

Running: Sprinkler icon indicates when watering is occurring

  Rain Drop: Indicates watering will occur on selected day

  Crossed Rain Drop: Indicates watering will NOT occur on selected day

Control Buttons and Switches

1. Increases the selected flashing display
2. Decreases the selected flashing display
3. Advances the selected flashing display to the next item, also use to start a manual cycle
4. Returns selected flashing display to the previous item
5. Selects programs A, B, and C; also to start a test program
6. Rain Sensor Bypass: SwitchUse to bypass weather “Clik-type” sensors if one is installed

Control Dial

1. Run: Normal dial position for automatic operation
2. Set Current Date/Time: Set current date and time
3. Set Program Start Times: Set 1 to 4 start times in each program
4. Set Station/Run Times: Set each station run time
5. Set Days to Water: Select individual days to water, odd, even or interval watering schedule
6. Set Pump Operation: Turn pump or master valve on or off for each station
7. Seasonal Adjustment: Make global run time changes without programming the controller (from 5% to 300%)
8. Solar Sync®: Allows user to program settings when using Solar Sync ET sensor
9. Manual-Single Station: Activates a one time watering of a single station
10. System Off: Used to discontinue all programs and stop all watering until the dial is returned to the RUN position, or to set the programmable rain off feature

Wiring Compartment

1. 9-Volt Battery: An alkaline battery (not included) allows programming of the controller without AC power
2. Reset Button: This button will reset the controller. All programmed data will remain intact
3. Power Area: Used to attach transformer, sensor wires, and other systems to the controller
4. SmartPort® Input Terminals: Used to connect  a SmartPort, which enables  Hunter remote controls
5. Transformer: A transformer is installed (Outdoor models only, indoor models are supplied with a plug-in transformer)
6. Junction Box: This box provides an area for connecting primary AC power (Outdoor models only)
7. Ground Lug: For additional surge protection, connect lug to earth ground
8. Sensor Terminals: Used to connect Hunter Solar Sync or “Clik-type” sensors
9. Power Slide:Release to remove or insert Pro-C modules