Setting Odd/Even Day Watering
This feature uses numbered day(s) of the month for watering instead of specific days of the week (odd days: 1st, 3rd, 5th, etc.; even days: 2nd, 4th, 6th, etc.)
- When you want to program ODD or EVEN days to water, press the (-) button until you see the icon or icon flashing above "SUN".
- Press the (-) button once, ODD will flash on the display. The controller is now set to water on ODD Days.
- If you want to water on EVEN days, press the (-) button once. EVEN will flash on the display. The controller is now set to water on EVEN Days. You can move back and forth between ODD and EVEN by pressing the (-) button.
- Once ODD or EVEN day watering is chosen, turn the dial back to the RUN position to set watering days.
- If you need to EXIT Odd/Even mode, press either arrow continuously until the days of the week appear.
NOTE: The 31st of any month and February 29th are always "OFF" days if ODD watering is selected.
Older Pro-c (PC-300) Instructions
On the older Pro-C controller (green buttons) set the ODD or EVEN using the following instructions:
- Press the (RIGHT ARROW) button until you see a flashing number on the upper left of the display with the word interval below. Press the button to set the number to "1".
- To set EVEN days to water, press the (RIGHT ARROW) button until the ODD flashes, then press the button once. You will see a icon flashing above "ODD". This indicates an interval of 1 day with NO ODD Day watering. The controller will water every EVEN day.
- To set ODD days to water, press the (RIGHT ARROW) button until the EVEN flashes, then press the button once. You will see a icon flashing above "EVEN". This indicates an interval of 1 day with NO EVEN Day watering. The controller will water every ODD day.
Still need help? We're here.
Tell us what you need support with and we'll find the best solution for you.