Support
ACC2 Support

ACC2 - Solar Sync

After connecting a SOLAR SYNC Sensor to the controller, it is necessary to configure this in the Devices, SOLAR SYNC menu. It will take the SOLAR SYNC two or three days to register enough climate data to begin adjusting.

After the steps below are completed, the SOLAR SYNC must be assigned to a program in the Seasonal Adjust menu. For more information on setting the Region and Water Adjustment, visit Solar Sync support.

Step 1

From the HOME menu, select the lower right soft key to view the MAIN MENU.

Step 2

Turn the scroll wheel to the right to view the DEVICES menu. Press wheel once and scroll to select the SOLAR SYNC option.

Step 3

Using the scroll wheel, select the ENABLE SOLAR SYNC box.

Step 4

Under the Solar Sync Settings tab, use the scroll wheel to select a REGION. For more information on setting the Region, visit Solar Sync support.

Step 5

Using the scroll wheel, select a WATER ADJUSTMENT. For more information on setting the Water Adjustment, visit Solar Sync support.

Step 6

If applicable, a DELAY can be set up for up to 250 days. Learn More

Rate this Article: 
0

Was this article helpful? Oui | No

S U P P O R T
M E N U