Support
NODE Support

NODE - Resetting and Clearing Controller's Memory

Resetting the controller will erase the current program data and restart the controller. A reset does not, however, delete a program saved to permanent memory using the Easy Retrieve Memory feature to save a preferred program.

 

  1. From the Idle Mode (Time, Day of Week, and Battery Indicator display), press and hold the  ,  and  keys.
  2. After two seconds the screen will go blank. Continue to hold down buttons.
  3. Four dashes will appear (----) on the display. Release the 3 buttons.
  4. Display will flash 12:00 AM. The controller may now be reprogrammed.
Rate this Article: 
5

Was this article helpful? Yes | No