NODE Support

Node - Setting the Seasonal Adjustment

  1. Press the button until the % is displayed.
  2. Press the plus (+) or minus (-) button to increase or decrease the seasonal adjustment value from the default 100% (down to a minimum of 10% or a maximum of 150%).
  3. The value programmed for seasonal adjustment will be applied to all irrigation programs and will immediately be reflected in the run times displayed. Example, if 20 minute run times are programmed and then the seasonal adjustment is changed from 100% to 50%, the run times displayed will be 10 minutes.

Rate this Article: 

Was this article helpful? Yes | No