FLOW SENSORS allow flow-capable controllers, such as the Hunter ACC2, to monitor actual flow in irrigation systems. With proper setup at the controller, this allows the controller to record and report actual flow in gallons. The recommended Flow-Sync can learn the typical flow for each zone of irrigation and monitor during watering for high and low flow conditions. This equips controllers to respond on their own to incorrect system performance, preventing damage to the landscape and wasted water resources.
NOTE:The controller has three Flow Sensor inputs built-in, but three more can be added with the A2C-F3 Flow Expansion Module.
This requires a specific model decoder (ICD-SEN) for ACC2 decoder model controllers.
IMPORTANT: Orange loop wire is used for Clik Sensors that do not require a 24VAC source.