Dial to Advanced Settings and select Conditional Response. Each response has a soft key for the “If” condition, a “Then” condition or action, and “Review Statement” to verify that the complete response will meet the goal.
You must review the statement and then enable it with the Enable checkbox, for the response to be in effect.
The possible responses depend on the object (Type) chosen in the "If" statement.
- An “If” statement is for a certain type of condition to function as a trigger.
- A “Then” statement is for the action taken as a response to the trigger.
Clik Sensors can use alarms as a trigger. They can also trigger based strictly on their position, Closed or Open, without causing an alarm.
Examples: A Clik could start a program, station, etc. whenever it alarms; or a Clik input could switch between two different Master Valves, based on whether it was open or closed.
Flow Zones and MainSafe zones can use Max Flow rate or Unscheduled Flow as triggers. Flow Zone triggers can be used to start an external alarm indicator, or to close a P/MV.
"Any Alarm", or just a list of "Critical Alarms", can be used as triggers, usually to start an external alarm indicator (see SOS).
You must Review and Enable the statement (check box) before the Conditional Response statement is active.
Set up a Conditional Response
Dial to Advanced Settings and select Conditional Response.
"IF" Type | Selection | Condition (Trigger) | "THEN" Actions | Other Rules |
---|---|---|---|---|
Clik Sensors |
Clik 1 |
Alarm |
Start Station Start Block Start SOS Start Program Close P/MV |
Manual/Auto Stop if Clears Yes/No |
Clik 2 |
Open |
Start Station Start Block Start SOS Start Program Close P/MV |
||
Clik 3 |
Close |
Start Station Start Block Start SOS Start Program Close P/MV |
||
Solar Sync |
Solar Sync Rain |
Alarm |
Start Station Start Block Start SOS Start Program Close P/MV |
|
Solar Sync Freeze |
||||
Flow Zone |
Flow Zone 1-6 |
Max Flow |
Start SOS Close P/MV |
|
Unscheduled Flow | ||||
Mainline Overflow | ||||
Any Station |
Water Source 1-6 |
Max Flow |
Start Station Start Block Start SOS Start Program Close P/MV |
|
Unscheduled Flow |
||||
Any Alarm |
(All Alarms) |
Alarm |
Start Station Start Block Start SOS Start Program Close P/MV |
|
Critical Alarm |
(Serious Alarms) |
Start Station Start Block Start SOS Start Program Close P/MV |
Still need help? We're here.
Tell us what you need support with and we'll find the best solution for you.