Pro-C^®

Number of Stations: 4-16, 6 & 12

Type: Modular and Fixed

Simple programming and flexible station expansion make Pro-C the professional's choice for residential and light commercial systems.

Product Tabs

Overview

Since 2001, the Pro-C has been the contractor’s choice in residential irrigation control. The Pro-C has proven to be the most reliable and robust controller in the industry, with the flexibility to expand on demand due to its modular design. When expansion isn't necessary, the fixed 6 and 12 station models offer affordability in a high-end residential controller.

Now, the Pro-C will easily accommodate Hunter’s Solar Sync® without additional wiring. The new Solar Sync dial position makes it easy to upgrade and program any Pro-C to smart control. The Hunter Solar Sync is an EPA WaterSense® labeled smart device which calculates evapotranspiration (ET) and adjusts Hunter controllers daily based on local weather conditions, resulting in water savings and conservation.

The Pro-C and all AC powered Hunter controllers are now EPA WaterSense labeled when paired with the Solar Sync weather sensor.

Key Benefits

Number of stations:
Modular Pro-C capacity from 4 to 16
Fixed PCC with 6- and 12-station options
3 independent irrigation programs (4 start times each) allow for customized scheduling
6-hour maximum station run time provides flexibility for differing application amount
1 sensor input available for use with Solar Sync® or any Clik sensors
1 P/MV output for pump start relay and master valve activation
Dedicated Solar Sync dial position provides logic for smart water savings
Easy Retrieve™ memory allows for manual backup and retrieval of preferred settings and programming
QuickCheck™ provides simple diagnostics of faulty field wiring
3 independent lighting programs available for simultaneous irrigation and lighting control

Advanced Features

WaterSense® Smart Watering Controller by adding Solar Sync

By adding a Solar Sync™ to your Hunter controller, it transforms into a smart controller using local weather conditions to tailor watering schedules to actual conditions on the site. A Hunter controller with Solar Sync has been independently proven to have a detailed list of water saving features and has been approved by the EPA as a WaterSense Smart Watering Controller. Click here to learn more about Smart Controllers

Easy Retrieve™ Memory

A manual back-up utility that stores complete controller scheduling and setup information in back-up memory. This allows the saved watering schedule to be restored at any time. This can be used to set a controller back to its initial settings after tampering or at the beginning of a new season.

Automatic Short Circuit Protection

Automatic short circuit protection is a feature found in all Hunter AC powered controllers. This feature automatically detects electrical faults, which are typically caused by wiring issues. Only affected stations are skipped, allowing all other stations to water normally as programmed. There are no fuses to blow or internal circuit breakers to trip, so complete irrigation system shutdown is avoided.

QUICK CHECK™

The QuickCheck feature makes field wiring issues easy to assess with the push of a button. QuickCheck displays an ERR message when a field wiring short is detected on a particular station number.

Seasonal Adjustment: Global or automatic updates with Solar Sync

This feature allows for quick adjustments to irrigation run times through a percentage scale. During peak season, set the seasonal adjustment to 100%. If weather conditions require less water, enter the appropriate percentage value (i.e. 50%) to cut down irrigation run times without the need to adjust each station in the program. This model offers two different ways to use Seasonal Adjustment to reduce water usage: Global and Daily.

Global: The Global option provides a Seasonal Adjustment percentage to all station Run Times on all of the controller's Programs.

Daily: With the addition of a Solar Sync ET Sensor, the controller has the ability to automatically implement daily adjustments based on measured local weather.

Delay Between Stations

Users can program a delay between stations as the controller advances from one station to the next. This delay can range from a few seconds (to permit slow-closing valves additional time to close) to a much longer period of time (to allow pressure tanks time to recharge), based on user requirements.

Sensor Programmability

The ability to specify which program will be shut down in response to a specific sensor alarm. This allows programs unaffected by the sensor to continue automatic operations.

Non-Water Days

Day(s) of the week can be programmed OFF in advance, so that irrigation does not occur regardless of program interval schedules. For example, if the gardener mows the lawn on Saturday, the Non-Water Days feature allows Saturday to be programmed OFF, so that watering will not occur.

Specs

Copy Link

PCC-Series Fixed 6-Station

Height: 9"
Width: 10"
Depth: 4½"

PCC-Series Fixed 12-Station

Height: 9"
Width: 10"
Depth: 4½"

PC-Series

Height: 9"
Width: 10"
Depth: 4½"

Modular Expansion

Pro-C's Modular version allows easy expansion after initial installation
Note: The existing PCM expansion modules work with the new and older version of the Pro-C

Operating Specifications

Transformer input: 120 VAC
Transformer output (24 VAC): 1 A
Station output (24 VAC): 0.56 A
P/MV output (24 VAC): 0.28 A
Approvals: UL, cUL, FCC, CE, RCM
Warranty period: 2 years

Documents

Copy Link

Manuals

PC-400 Owner's Manual

PCC-Series Owners Manual (PDF Only)

Pro-C / PCC Door Card

USA

Pro-C with PXSYNC Installation Card

PC-300 Owner's Manual

Literature

Pro-C Product Cutsheet

CAD Installation Details

CAD - Pro-C with Smart Port

Specifications

USA

Metric

Pro-C Installation Details - DWG

USA

Metric

Pro-C Installation Details - DXF

USA

Metric

Pro-C Installation Details - PDF

USA

Pro-C Written Specification

Photos

Copy Link

Application

Studio

Photos Data Placeholder

Residential AC Powered Controller Comparison Chart

DOWNLOAD View Advanced AC Powered Controllers >>

View Battery Powered Controllers >>

Growing Better Neighborhoods
Hunter's residential controllers offer simple to advanced automatic watering with an abundance of user-friendly features. Most Hunter controllers can be upgraded to "smart controllers" by adding sensors.


	X-Core	X2 with WAND*	HC	Pro-HC	Pro-C	HPC
QUICK SPECS
Number of Stations	2, 4, 6, 8	4, 6, 8, 14	6, 12	6, 12, 24	6, 12 or 4-16	4-16
Type*	Fixed	Fixed	Fixed	Fixed	Fixed or Modular	Modular
Number of Programs	3	3	36	36	3	36
Start Times Per Program	4	4, 6*	6, 36	6, 36	4	6, 36
Warranty	2 Years	2 Years	2 Years	2 Years	2 Years	2 Years
FEATURES
Enclosure Type	Plastic Indoor Plastic Outdoor	Plastic Outdoor	Plastic Indoor	Plastic Indoor Plastic Outdoor	Plastic Indoor Plastic Outdoor	Plastic Indoor Plastic Outdoor
Transformer Types	Plug In Outdoor	Plug In Outdoor	Plug In	Plug In Outdoor	Plug In Outdoor	Plug In Outdoor
Hunter Solar Sync ET Sensor Compatible	Yes	No	No	No	Yes	No
Hydrawise Software Compatible	No	Yes	Yes	Yes	No	Yes
Remote Control Compatible	Yes (ROAM, ROAMXL)	Yes (Smart Phone, ROAM, ROAMXL)	Yes (Smart Phone)	Yes (Smart Phone)	Yes (ROAM, ROAMXL)	Yes (Smart Phone, ROAM, ROAMXL)
Flow Sensor Compatible	No	No	Yes	Yes	No	Yes
Rain/Freeze Sensor Compatible	Yes	Yes	Yes	Yes	Yes	Yes
Number of Sensor Inputs	1	1	2	2	1	1
Max Station Run Time (Hrs)	4	6 or 24*	24	24	6	24
APPLICATION
Residential
Light Commercial
* Fixed or modular indicates the controllers ability to expand the number of stations from a base count.

Golf Innovations

How?

Why?

Questions?

Pro-C®

Simple programming and flexible station expansion make Pro-C the professional's choice for residential and light commercial systems.

Product Tabs

Key Benefits

Advanced Features

Order Information - Model Builder

Pro-C® Controller

Log in to access this feature

Selected Accessories & Parts

Select user-installed options

Compatible Sensors

Manuals

Literature

CAD Installation Details

Specifications

Application

Studio

Products

Comparison Chart

Pro-C^®