
Os Tempos de Rega podem ser acessados no menu de programação ou pelos atalhos das teclas multifunção na tela de Horários de Início. Com isso, é possível configurar um programa completo (horários de início, tempos de rega e dias de rega) no mesmo menu.
Verifique se você está no programa correto através do número ou nome.
Selecione o campo Tipo de Execução e depois selecione Setor ou Grupo (saiba mais sobre os Grupos na seção Menu de Setores. Os Grupos substituíram os "SSGs" do ACC original). Pressione o seletor para escolher o tipo.
Gire o seletor até o campo Número. Pressione e gire o seletor para escolher o número do setor ou do grupo. Pressione para entrar.
Dial to the Run Time field, press to select, and dial to enter the run time (from 1 minute to 12 hours). You can also enter run times in seconds, by dialing to the: SS field (seconds), which is adjusted separately.
Você pode continuar inserindo os números dos setores, em qualquer ordem, da mesma maneira.
Show Edit Tools (Shortcuts): Press the soft key for Show Edit Tools. If you are running stations in numerical order, you can use the soft key for Fill Down. This will automatically add 1 to the previous station number, and copy the run time on the next line. For example, if you entered Station 1, 5 minutes, and then pressed Fill Down, it would add Station 2 for 5 minutes on the next line. This is a shortcut for copying sequential run times very quickly.
You can also Delete any item from the list. Scroll to the item, and press Delete.
You can also Insert an item above any selected line in the list. Scroll to an item, and press Insert Line, and a blank line will appear above it.
ACC2 can run any station or block in any order. Example: you could insert station 3 between stations 1 and 2. The program would run 1, 3, 2, in that order.
Adjusted Run Times: The Adjusted Run Times show the effects of the current Seasonal Adjust settings on the base run time. If a run time is set to 10 minutes, but Seasonal Adjust is at 50%, the Adjusted Run Time will show 5 minutes. The Seasonal Adjust amount is not changed in this screen, but can be set from the Programs menu, or automatically by a Solar Sync sensor.
Quando todos os Tempos de Rega do programa forem definidos, pressione Voltar ou Início para sair.